Using the X-Lite Softphone with Switchvox

Download X-Lite from www.counterpath.com.

1. Install X-Lite per its instructions
2. Start X-Lite
3. Click Options (the left-most icon of the 3 at the top of interface)
   The Options dialog box is displayed.
4. Click SIP Account Settings...
5. Click Add button
6. In the Account tab, setup the following:
   1. Account Name:  Enter the name you want for this account. e.g. "John Doe".
   2. User ID:  Enter the Switchvox extension.
   3. Domain:  Enter the Switchvox IP address.  If you are a remote user, be sure to use the External IP address for Switchvox
   4. Password:  Enter the phone password that was set under Phone Settings >Common Settings section of the Switchvox extension.
   5. Display Name:  Enter the name you want to display on the softphone.
   6. Authorization Name:  Enter the Switchvox extension.  
   7. Leave all other settings as their default.
      
      
7. Click Apply.
8. Close the SIP Accounts box.

Give it a minute or two to register with Switchvox, and you'll be ready to make calls.

If you are registering to a Switchvox Demo server, you can

• dial other extensions on the demo server
• dial outside numbers by dialing a 9 first, and then the number