To configure a Linksys PAP2t ATA Device please do the following:
-
Determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack, then dial: **** (four asterisks), then dial: 110 #. This will tell you the IP address of your device (example: 192.168.1.100)
-
Go to any browser equipped computer on your network and enter the address: http://<IP ADDRESS> (Replace <IP ADDRESS> with the address that was given to you in STEP 1.)
-
Click the Admin Login link in the top right
-
Click on the link to 'Switch to advanced view' found in the middle of the top part of the page
-
Click on Line 1 from the categories along the top of the page.
-
Set the following items:
Proxy: Your IP address
Register Expires: 120
Display Name: The extension it will be assigned
User ID: The extension it will be assigned
Password: The Phone Password. In the /admin interface for Switchvox, go to Setup > Manage > Click on Modify for the extension > go to Phone Settings > Common Settings. ** This is not the same as the numeric password under Profile Settings. **
Auth ID: The extension it will be assigned